KHOOM PLIG:
AWS: A5.14
Conforms to Certification: AWS A5.14 ASME SFA A5.14
Weld txheej txheem: GMAW & ASAW Vuam txheej txheem
ERNiCrMo-10 yog siv rau vuam nickel-chromium-molybdenum puag cov ntaub ntawv rau lawv tus kheej, hlau thiab lwm yam nickel puag alloys, thiab rau cladding steels.Yuav siv tau los vuam duplex, super duplex stainless hlau.
AWS Chemical Composition Requirements
| C = 0.015 max | Cu = 0.50 max |
| Mn = 1.0 max | Ni = Remainder |
| Fe = 3.0 max | Co = 2.0 max |
| P = 0.04 max | Cr = 14.0 - 18.0 |
| S = 0.03 max | Mos = 14.0 - 18.0 |
| Si = 0.08 max | W = 0.50 max |
| Lwm yam = 0.50 max | Ti = 0.70 max |
Thov hu rau cov ntaub ntawv ntau ntxiv thiab muaj qhov ntau thiab tsawg:
Daim ntawv thov
ERNiCrMo-7 yog siv rau vuam nickel-chromium-molybdenum puag cov ntaub ntawv rau nws tus kheej, hlau thiab lwm yam nickel puag alloys thiab rau cladding steel nrog NI-CR-MO weld khoom
PRODUCT PARAMETERS:
| Deposited Chemcial Composition % (Tswj) | ||
| C = 0.01 | Cr = 16.5 | Ni = Balance |
| IB = 2.20 | Luas = 15.75 | |
| Deposited All Weld Metal Properties % (AW) | ||
| Tensile zog | 113.00 Nws | |
| Elongation | 29% | |
DEPOSITED CHARPY-V-NOTCH IMPACT PROPERTIES:
Tsis siv tau
| Pom zoo Vuam Parameters rau MIG thiab SAW Vuam ntawm Nickel Alloys | ||||
| Txheej txheem | Txoj kab uas hla | Qhov voltage (V) | Amperage (A) | Roj |
| MIG | .035 ib | 26–29 : kuv | 150-190 Nws | 75% Argon + 25% Helium |
| .045 ib | 28-32 : kuv | 180-220 : kuv | 75% Argon + 25% Helium | |
| 1/16 nti | 29-33 : kuv | 200-250 | 75% Argon + 25% Helium | |
| SAW | 3/32 po | 28-30 : kuv | 270-350 : kuv | Tsim nyog Flux yuav siv tau. |
| 1/8 nti | 29-32 : kuv | 350-450 ib | Tsim nyog Flux yuav siv tau. | |
| 5/32 po | 30-33 : kuv | 400-550 | Tsim nyog Flux yuav siv tau. | |
